• Sản phẩm đã được thêm vào giỏ hàng:

    Idrosilex 2K

    0 out of 5

    Idrosilex 2K

    Flexible, protective cementitious mortar for waterproofing.

    TECHNICAL DATA:
    Consistency: comp. A: power, comp. B: liquid.
    Color of mix: grey.
    Mixing ratio: comp. A : comp. B = 4 : 1.
    Pot life at +20OC: 2 hours.
    Consumption: 1.8 kg/m2 per mm of thickness.
    Packaging: 25 kg:
    – 20 kg bag (comp. A);
    – 5 kg drum (comp. B).

    675.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Lamposilex

    0 out of 5

    Lamposilex

    Ultra quick-setting and hardening hydraulic binder for blocking seeping water.

    TECHNICAL DATA:
    Consistency: fine powder.
    Workability time at +200C: approximately 1 minute.
    Storage: 12 months.
    Mixing ratio: 100 g of LAMPOSILEX with 28 g of water.
    Minimum application temperature: +50C.
    Consumption: 1.8 kg/dm3 of cavities to be filled.
    Packaging: 5 kg drums.

    436.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Planicrete SP

    0 out of 5

    Planicrete SP

    Multipurpose latex additive for motar and cementitious adhesives.

    TECHNICAL DATA:
    Consistency: liquid.
    Consumption:
    – for slurry bond coat/spatter-dash coat: 0.3 kg/m2;
    – for floor screed and wall plaster: 1 kg/m2 of 20 mm thickness;
    – for tile adhesives: depending on size of tiles.
    Packaging: 5 and 25 kg drums.

    348.0001.478.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Kerabond T

    0 out of 5

    Kerabond T

    Cementitious adhesive with no vertical slip for ceramic tiles and stones (thickness of adhesive up to 5 mm).
    Conformity of Kerabond T is declared in ITT certificates n° 25050176-1/Gi (TUM) and n° 25080238/Gi (TUM) issued by the Technische Universität München laboratory (Germany) and in ITT certificates n° 1220.8/10/R03 NPU; 1220.10/10/R03 NPU and 1220.9/10/R03 NPU issued by the ITB Katowice Institute (Poland).
    Kerabond T is certified Vietnamese standards TCVN 7899:2008 and ISO 13007:2005.

    TECHNICAL DATA:
    Pot life of mix: more than 8 hours.
    Open time: 20 minutes.
    Waiting time before grouting:
    – on walls: 4-8 hours;
    – on floors: 24 hours.
    Set to light foot traffic: approx. 24 hours.
    Ready for use: approx. 14 days.
    Colours: grey.
    Application: N° 4, 5 or 6 notched trowel.
    EMICODE: EC1 R Plus – very low emission.
    Storage: 12 months.
    Consumption: 2-6 kg/m2 or over (depending on the size of tiles and stones).
    Packaging: 25 kg bag.

    295.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Isolastic 50

    0 out of 5

    Isolastic 50

    Latex additive to elasticize cement-based adhesives.

    TECHNICAL DATA:
    KERABOND T / ADESILEX P10 + ISOLASTIC 50:
    Pot life: 8 hours.
    Open time: > 30 minutes.
    Grouting:
    – walls: 4-8 hours;
    – floors: 24 hours.
    Set to light foot traffic: 24 hours.
    Ready for use: approx. 14 days.
    Deformability according to EN 12002: S1 – deformable.
    Application: n. 4 or 5 or 6 notched trowel.
    Storage: 24 months. Protect from frost.
    Consumption: 0.6-1.6 kg/m2 depending on size of tiles.
    Packaging: 25 kg drum.

    1.720.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Mapelastic

    0 out of 5

    Mapelastic

    Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

    TECHNICAL DATA:
    Consistency of mix: plastic-trowable.
    Mixing ratio: comp. A: comp. B = 3 : 1.
    Pot life of mix: approximately 1 hour.
    Application temperature range: from +50C to +350C.
    Minimum applicable thickness: 2 mm in 2 coats.
    Classification: EN 1504-2 – coating (C) principles PI, MC and IR and EN 14891 norm.
    Storage: 12 months comp. A, 24 months comp. B.
    Application: trowel or by spray.
    Consumption:
    – trowel: 1.7 kg/m2 per mm of thickness;
    – spray: 2.2 kg/m2 per mm of thickness.
    Packaging:
    – 32 kg units: 24 kg bags + 8 kg tanks;
    – 8 kg units: 6 kg bags + 2 kg drums.

    507.0001.892.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Keraset

    0 out of 5

    Keraset

    Cementitious adhesive for ceramic tiles and stones (thickness of adhesive up to 5 mm).
    Conformity of Keraset is declared in ITT certificate n° 71230101.101 (SFV) issued by the Säurefliesner-Vereinigung e.V. Grossburgwedel laboratory (Germany) and n° 25080231/Gi (TUM) issued by the Technische Universität München laboratory (Germany) and in certificates ITT n° 2008-B-2749/01 and 2008-B-2749/04 issued by the MPA Dresden Institute (Germany).
    Keraset is certified Vietnamese standards TCVN 7899:2008 and ISO 13007:2005.

    TECHNICAL DATA:
    Pot life of mix: 6-8 hours.
    Open time: 20 minutes.
    Waiting time before grouting:
    – on walls: 3-6 hours;
    – on floors: 24 hours.
    Set to light foot traffic: approx. 24 hours.
    Ready for use: approx. 14 days.
    Colours: grey and white.
    Application: N° 4, 5 or 6 notched trowel.
    EMICODE: EC1 R Plus – very low emission.
    Storage: 12 months.
    Consumption: 2-15 kg/m2 or over (depending on the size of tiles and stones).
    Packaging: 5 and 25 kg bags.

    88.000337.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Primer G

    0 out of 5

    Primer G

    Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC).

    TECHNICAL DATA:
    Mixing ratio: comp. A : comp. B = 80 : 20.
    Colour of mix: neutral.
    Consistency of the mix: dense fluid.
    Density of mix (kg/m3): 1500.
    Viscosity of the mix (mPa•s): 1,200.
    Pot life: 30 min.
    Application temperature range: from +80C to +350C.
    Dust dry at +230C and 50% R.H.: 2-4 hours.
    Set to light foot traffic at +230C and 50% R.H.: 12 hours.
    Final setting time: 7 days.
    Application: flat American trowel or smooth trowel.
    Consumption: 0.3-0.6 kg/m2 per coat, depending on the absorbency and characteristics of the substrate.
    Packaging: 20 kg kits:
    – comp. A = 16 kg;
    – comp. B = 4 kg.

    Price: Contact
  • Sản phẩm đã được thêm vào giỏ hàng:

    Mapeplast R15 VN

    0 out of 5

    Mapeplast R15 VN

    Retarding plasticizer for concrete.

    Mapeplast R15 VN is a liquid plasticizing admixture with retarding action for concrete.

    WHERE TO USE
    Mapeplast R15 VN is especially recommended for all applications where a moderate rate of hydration is required at the early stage of curing.
    It is primarily used for:
    •- ready-mixed concrete (especially in warm weather);
    -• pumpable concrete;
    -• mass concrete.

    CONSUMPTION
    Dose by weight: from 0.2 to 0.8 kg for every 100 kg of cement.

    STORAGE
    Store in closed containers, protect from frost and exposure to direct sunlight.

    99.000422.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Keracolor FF

    0 out of 5

    Keracolor FF

    Pre-blended, high-performance, polymermodified cementitious mortar with water-repellent DropEffect® technology for grouting joints up to 6 mm wide.
    Keracolor FF is certified Vietnamese standards TCVN 7899:2008 and ISO 13007-3 as CG2WA.

    TECHNICAL DATA:
    Pot life of mix: approx. 2 hours.
    Waiting time before finishing: 10-20 minutes.
    Set to light foot traffic: approx. 24 hours.
    Ready for use: 7-10 days.
    Colours: 17.
    Application: rubber MAPEI trowel or rake.
    Finishing: MAPEI sponge or Scotch-Brite® pad.
    EMICODE: EC1 R Plus – very low emission.
    Storage: 12 months (22 and 25 kg bags), 24 months (2 and 5 kg bags).
    Consumption: according to the size of the joints.
    Packaging: 2, 5, 22 and 25 kg bags, according to the colour.

    38.000464.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Adesilex P10

    0 out of 5

    Adesilex P10

    High-performance, white cementitious adhesive with no vertical slip and extended open time for glass mosaic, ceramic and marble coatings (thickness of adhesive up to 5 mm).
    Conformity of Adesilex P10 is declared in ITT certificate n° 25080061/Gi (TUM) issued by the Technische Universität München laboratory (Germany) and in ITT certificates n° 2008-B-
    2749/13 and 2008-B-2749/16 issued by the MPA Dresden Institute (Germany).
    Adesilex P10 is certified Vietnamese standards TCVN 7899:2008 and ISO 13007:2005.

    TECHNICAL DATA:
    Pot life of mix: more than 8 hours.
    Open time: ≥ 30 minutes.
    Waiting time before grouting:
    – on walls: 4-8 hours;
    – on floors: 24 hours.
    Set to light foot traffic: approx. 24 hours.
    Ready for use: approx. 14 days.
    Colour: white.
    Application: N° 4, 5 or 6 notched trowel.
    EMICODE: EC1 R Plus – very low emission.
    Storage: 12 months.
    Consumption: 2-5 kg/m2.
    Packaging: 25 kg bags.

    506.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Primer SN

    0 out of 5

    Primer SN

    Two-component epoxy primer with fillers.
    May be coloured with MAPECOLOR PASTE.

    TECHNICAL DATA:
    Mixing ratio: comp. A : comp. B = 80 : 20.
    Colour of mix: neutral.
    Consistency of the mix: dense fluid.
    Density of mix (kg/m3): 1500.
    Viscosity of the mix (mPa•s): 1,200.
    Pot life: 30 min.
    Application temperature range: from +80C to +350C.
    Dust dry at +230C and 50% R.H.: 2-4 hours.
    Set to light foot traffic at +230C and 50% R.H.: 12 hours.
    Final setting time: 7 days.
    Application: flat American trowel or smooth trowel.
    Consumption: 0.3-0.6 kg/m2 per coat, depending on the absorbency and characteristics of the substrate.
    Packaging: 20 kg kits:
    – comp. A = 16 kg;
    – comp. B = 4 kg.

    Price: Contact
  • Sản phẩm đã được thêm vào giỏ hàng:

    Mapetop SP

    0 out of 5

    Mapetop SP

    Ready-to-use mineral dry-shake surface hardener.

    TECHNICAL DATA:
    Color:
    – Standard: natural grey.
    – On request: green, red, light grey, etc.
    Storage: 12 months in closed original packaging on a wooden base in a dry and sheltered place. Do not use open or damaged bags.
    Consumption: depend mainly on the service conditions to which the floors will be exposed and on the required color: from 3 to 11 kg/m2.
    Packaging: 25 kg paper bag.

    Price: Contact
  • Sản phẩm đã được thêm vào giỏ hàng:

    Adesilex PG2 SP

    0 out of 5

    Adesilex PG2 SP

    Two-component thixotropic epoxy adhesive for structural bonding.

    TECHNICAL DATA:

    Color: part A (grey), part B (white).

    Color of mix: grey.

    Final hardening: 7 days.

    Application: flat trowel for float.

    Consumption: 1.50-1.60 kg/m2 per mm of thickness.

    Packaging:

    • kg units (Part A = 0.75 kg, Part B = 0.25 kg).

    5 kg units (Part A = 3.75 kg, Part B = 1.25 kg).

     

    304.0001.306.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Keracolor SF

    0 out of 5

    Keracolor SF

    Fine-grained, high-performance cementitious mortar for grouting joints up to 4 mm wide.

    Keracolor SF is certified Vietnamese standards TCVN 7899:2008 and ISO 13007-3 as CG2WA.

     

    TECHNICAL DATA:

    Pot life of mix: approx. 2 hours.

    Waiting time before finishing: 10-20 minutes.

    Set to light foot traffic: approx. 24 hours.

    Ready for use: 7 days.

    Colour: see MAPEI coloured grouts.

    Application: rubber MAPEI trowel or rake.

    Finishing: MAPEI sponge or Scotch-Brite® pad.

    EMICODE: EC1 R Plus – very low emission.

    Storage: 12 months (20 and 22 kg bags), 24 months (2 and 5 kg bags).

    Consumption: according to the size of the joints.

    Packaging: 2, 5, 20 and 22 kg bags, according to the colour.

    51.000566.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    K11 High Flexible Waterproofing Slurry

    0 out of 5

    K11 High Flexible Waterproofing Slurry

    Waterproofing coating suitable for the usage in toilets, bathrooms, terraces, interior or exterior water tanks and swimming pools, balconies

     

    Packaging:

    – 43 kg units: 25 kg bags + 18 kg drums;

    – 20 kg units: 11,6 kg bags + 8,4 kg drums;

    927.0001.779.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Antipluviol

    0 out of 5

    Antipluviol

    High-performance, silicone waterrepellent in watery solution for external walls.

     

    TECHNICAL DATA:

    Consistency: fluid liquid.

    Colour: transparent.

    Density (EN ISO 2811-1) (g/cm³): approx. 1.02.

    Dry solids content (EN ISO 3251) (%): approx. 5.

    Dilution rate: supplied ready to use.

    Surface drying time: 1-2 hours.

    Application temperature range: from +5°C to +35°C.

    Cleaning: water.

    Storage: 24 months.

    Application: roller, brush or spray.

    Consumption: 0.2-1 kg/m² (according to the porosity of the substrate).

    Packaging: 25 kg drums.

    1.357.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    MA.P.E./A

    0 out of 5

    MA.P.E./A

    Additives formulated for grinding of masonry cements. They allow an air entrainment of 16-

    18%, improve water retention and workability. Tailored formulations may also perform as

    grinding aids.

    Recommended dosage: 0,6-1,0 kg/t.

    Price: Contact
  • Sản phẩm đã được thêm vào giỏ hàng:

    Mapequick AFK 888

    0 out of 5

    Mapequick AFK 888

    Alkali-free accelerator for shotcrete

    Mapequick AFK 888 is a liquid accelerator based on alkali-free, inorganic salts developed for shotcrete with a very quick setting time.

    Mapequick AFK 888 is formulated to be used both in dry-mix as well as wet-mix shotcrete spray systems. Because of its absence of alkali, Mapequick AFK 888 does not trigger alkali-aggregate reaction. For this reason

    Mapequick AFK 888 reduces the risk of obstructing water drainage.

    Some applications

    – Securing surfaces during tunnelling;

    – Shotcrete for structural tunnel repairs;

    – Shotcrete applications with high mechanical performance;

    – Shotcrete applications with high mechanical strength (> 40 MPa) for final tunnel lining;

    – Consolidation of rock and cliff-faces.

    Dosage

    From 3 to 8 kg per 100 kg of cement.

    Packaging

    Mapequick AFK 888 is supplied in 274 kg drums and 1288 kg tanks. Bulk quantities are also available upon request.

    Price: Contact
  • Sản phẩm đã được thêm vào giỏ hàng:

    Mapefluid N100 SP

    0 out of 5

    Mapefluid N100 SP

    Superplasticiser for concrete with a slight retarding effect.

     

    Mapefluid N100 SP is used to manufacture concrete with high fluidity (consistency class S4 and S5 according to EN 206 – 1) and a high performance in service.

    Mapefluid N100 SP is suitable for all those applications (precast concrete, pumpable and mass concrete) that require a long period of workability and/or a moderately fast hydration of the cement at early age.

    Mapefluid N100 SP is a brown-coloured liquid admixture with a base of active polymers in water solution that disperse cement grains.

    Add Mapefluid N100 SP directly into the mixture after the other ingredients (cement, aggregate, water).

    Mapefluid N100 SP can also be diluted into the mixing water beforehand, but its superplasticising action is less effective.

    Dosage

    0.5 to 1.5 litres per 100 kg of cement.

    Packaging

    200 L drums, 1000 L tanks.

    Price: Contact
  • Sản phẩm đã được thêm vào giỏ hàng:

    Mapefill GP

    0 out of 5

    Mapefill GP

    General purpose non-shrink grout.

     

    TECHNICAL DATA:

    Maximum dimension of aggregate: 1 mm.

    Mixing ratio:

    trowellable mix: 25 kg of MAPEFILL GP with 3.25-3.75 litres of water.

    pumpable mix: 25 kg of MAPEFILL GP with 3.75-4.25 litres of water.

    pourable mix: 25 kg of MAPEFILL GP with 4.25-4.75 litres of water.

    Pot life of mix: approximately 60 minutes.

    Storage: 12 months.

    Application: pouring.

    Consumption: every 25 kg bag of MAPEFILL GP can yield 13-14 litres of grout.

    Packaging: 25 kg bags.

    285.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Ultrabond P990 1K

    0 out of 5

    Ultrabond P990 1K

    One-component, ready-to-use, solvent-free, flexible polyurethane adhesive for all types of parquet on screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM and TOPCEM PRONTO, cementitious screeds, old wooden, ceramic, marble and terrazzo floors, etc.

    Also suitable for heated substrates.

     

    TECHNICAL DATA:

    Consistency: creamy paste.

    Colour: beige and brown.

    Open time: 110 minutes.

    Set to light foot traffic: after 12 hours.

    Sanding: after 3 days.

    EMICODE: EC1 R Plus – very low emission.

    Storage: 12 months.

    Application: N° 2 or 4 notched trowel for wood.

    Consumption: 0.8-1 kg/m².

    Packaging: 7 and 15 kg aluminium bags contained in plastic drums. Boxes containing 20×600 cc soft-cartridges.

    3.117.000
  • Sản phẩm đã được thêm vào giỏ hàng:

    Mapefloor I 300 SL

    0 out of 5

    Mapefloor I 300 SL

    Two-component, multi-purpose, neutralcoloured epoxy formulate for industrial floor coatings up to 4 mm thick.

    May be coloured with MAPECOLOR PASTE

     

    TECHNICAL DATA:

    Mixing ratio: comp. A : comp. B = 3 : 1.

    Colour of mix: neutral.

    Consistency of mix: viscous fluid.

    Dust dry at +23OC and 50% R.H.: 2-4 hours.

    Set to light foot traffic at +23OC and 50% R.H.: 24 hours.

    Final hardening time: 7 days.

    Taber Test after 7 days (EN ISO 5470-1) CS17 disk, 1000 cycles, 1000 g at +23OC – 50% R.H.: 70 mg.

    Storage: 24 months in its original sealed packaging.

    Application: by roller or flat or notched trowel.

    Consumption:

    – 2.0 kg/m² for 2 mm thick self-levelling coatings on substrates primed with PRIMER SN;

    – 0.9 kg/m² for intermediate layers in 3 mm thick non-slip coatings on substrates primed with PRIMER SN;

    – 0.6 kg/m² for finishing layers in 1 mm and 3 mm thick non-slip coatings on substrates primed with PRIMER SN.

    Packaging: 8 and 20 kg kits (A+B).

    Price: Contact
  • Sản phẩm đã được thêm vào giỏ hàng:

    Mapecryl Eco

    0 out of 5

    Mapecryl Eco

    Acrylic adhesive in water dispersion for vinyl and textile floors with very low emission level of volatile organic compounds (VOC).

    TECHNICAL DATA:

    Consistency: creamy paste.

    Colour: light beige.

    Waiting time: 0-10 minutes.

    Open time: 20-30 minutes.

    Set to light foot traffic: 3-5 hours.

    Ready for use: approximately 48-72 hours.

    EMICODE: EC1 – very low emission.

    Storage: 12 months. Protect from frost.

    Application: N° 1, 2 notched trowel, TKB A1, A2,

    B1, B2.

    Consumption: 0.30-0.50 kg/m².

    Packaging: 16 and 25 kg drums.

    Price: Contact