• Sản phẩm đã được thêm vào giỏ hàng:

    Mapefloor I 300 SL

    0 out of 5

    Mapefloor I 300 SL

    Two-component, multi-purpose, neutralcoloured epoxy formulate for industrial floor coatings up to 4 mm thick.

    May be coloured with MAPECOLOR PASTE

     

    TECHNICAL DATA:

    Mixing ratio: comp. A : comp. B = 3 : 1.

    Colour of mix: neutral.

    Consistency of mix: viscous fluid.

    Dust dry at +23OC and 50% R.H.: 2-4 hours.

    Set to light foot traffic at +23OC and 50% R.H.: 24 hours.

    Final hardening time: 7 days.

    Taber Test after 7 days (EN ISO 5470-1) CS17 disk, 1000 cycles, 1000 g at +23OC – 50% R.H.: 70 mg.

    Storage: 24 months in its original sealed packaging.

    Application: by roller or flat or notched trowel.

    Consumption:

    – 2.0 kg/m² for 2 mm thick self-levelling coatings on substrates primed with PRIMER SN;

    – 0.9 kg/m² for intermediate layers in 3 mm thick non-slip coatings on substrates primed with PRIMER SN;

    – 0.6 kg/m² for finishing layers in 1 mm and 3 mm thick non-slip coatings on substrates primed with PRIMER SN.

    Packaging: 8 and 20 kg kits (A+B).

    Price: Contact
  • Sản phẩm đã được thêm vào giỏ hàng:

    Mapetop SP

    0 out of 5

    Mapetop SP

    Ready-to-use mineral dry-shake surface hardener.

    TECHNICAL DATA:
    Color:
    – Standard: natural grey.
    – On request: green, red, light grey, etc.
    Storage: 12 months in closed original packaging on a wooden base in a dry and sheltered place. Do not use open or damaged bags.
    Consumption: depend mainly on the service conditions to which the floors will be exposed and on the required color: from 3 to 11 kg/m2.
    Packaging: 25 kg paper bag.

    Price: Contact
  • Sản phẩm đã được thêm vào giỏ hàng:

    Primer G

    0 out of 5

    Primer G

    Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC).

    TECHNICAL DATA:
    Mixing ratio: comp. A : comp. B = 80 : 20.
    Colour of mix: neutral.
    Consistency of the mix: dense fluid.
    Density of mix (kg/m3): 1500.
    Viscosity of the mix (mPa•s): 1,200.
    Pot life: 30 min.
    Application temperature range: from +80C to +350C.
    Dust dry at +230C and 50% R.H.: 2-4 hours.
    Set to light foot traffic at +230C and 50% R.H.: 12 hours.
    Final setting time: 7 days.
    Application: flat American trowel or smooth trowel.
    Consumption: 0.3-0.6 kg/m2 per coat, depending on the absorbency and characteristics of the substrate.
    Packaging: 20 kg kits:
    – comp. A = 16 kg;
    – comp. B = 4 kg.

    Price: Contact
  • Sản phẩm đã được thêm vào giỏ hàng:

    Primer SN

    0 out of 5

    Primer SN

    Two-component epoxy primer with fillers.
    May be coloured with MAPECOLOR PASTE.

    TECHNICAL DATA:
    Mixing ratio: comp. A : comp. B = 80 : 20.
    Colour of mix: neutral.
    Consistency of the mix: dense fluid.
    Density of mix (kg/m3): 1500.
    Viscosity of the mix (mPa•s): 1,200.
    Pot life: 30 min.
    Application temperature range: from +80C to +350C.
    Dust dry at +230C and 50% R.H.: 2-4 hours.
    Set to light foot traffic at +230C and 50% R.H.: 12 hours.
    Final setting time: 7 days.
    Application: flat American trowel or smooth trowel.
    Consumption: 0.3-0.6 kg/m2 per coat, depending on the absorbency and characteristics of the substrate.
    Packaging: 20 kg kits:
    – comp. A = 16 kg;
    – comp. B = 4 kg.

    Price: Contact